AimBench

Best DAC/amp for the HiFiMan Edition XS

The HiFiMan Edition XS is a 18Ω open-back pair. To hit clean 110 dB transient peaks — the headroom that keeps footsteps and gunfire punchy, not just loud — it needs about 63.1 mW into that load. The pick that does it most affordably is the Schiit Magni Unity.

What the Edition XS needs

SpecValueWhy it matters
Impedance18 ΩEasy-ish load, but damping still matters
Sensitivity92 dB/mWHow loud per unit power
Power for 110 dB peaks~63.1 mWTransient headroom for positional cues
Amp output impedance≤ 2 Ω idealThe 8:1 damping rule — keeps the tuning flat

Sound character — footsteps, general use & music

AxisGradeWhat it means
Footsteps (positional)5/5The ONLY competitive axis — and it saturates: any clean open-back clears the bar, so more above baseline buys little advantage.
General use4/5All-round daily versatility — comfort/preference, not a competitive edge.
Music5/5Tonal enjoyment — preference, never advantage.

wide, deep planar stage, precise imaging; clean, detailed, brightish (Graded 1–5 relative to our catalog; sourced from measurement/review consensus.)

DAC/amps ranked for the Edition XS

The 8:1 damping rule
For tight, neutral bass the headphone's impedance should be at least the amp's output impedance (Zout). Below that, a high-Zout source loses control of the driver — bass bloats and the frequency response shifts with the load. AimBench checks this ratio as a pass/fail sufficiency gate, not a graded score.
DAC / AmpPower @ 18ΩHeadroomDampingVerdict
Schiit Magni Unity2500 mW+16 dB180:1Drives it comfortably
JDS Labs Atom Amp 22600 mW+16 dB26:1Drives it comfortably
FiiO K5 Pro ESS1500 mW+14 dB15:1Drives it comfortably
Topping L30 II2500 mW+16 dB180:1Drives it comfortably
Topping DX3 Pro+1800 mW+15 dB180:1Drives it comfortably
FiiO K71220 mW+13 dB18:1Drives it comfortably
FiiO K111400 mW+13 dB6:1Adequate
Creative Sound Blaster G6130 mW+3 dB18:1Adequate
Apple USB-C 3.5mm dongle30 mW-3 dB20:1Underpowered

"Headroom" is power available vs the ~63.1 mW needed for 110 dB peaks (more = cleaner transients). "Damping" is the headphone impedance ÷ amp output impedance — at least 8:1 keeps the frequency response flat. Specs are sourced; the target SPL and 8:1 rule are the declared model.

The pick: Schiit Magni Unity

For the HiFiMan Edition XS, the Schiit Magni Unity delivers ~2500 mW into 18Ω (+16 dB of headroom) at a 180:1 damping ratio — clean, loud, and tonally neutral. It's the most cost-effective amp here that drives these without compromise.

Specs are sourced (manufacturer sheets + RTINGS / Audio Science Review, each with a verified date in our catalog). Buy links are affiliate links to your regional store — AimBench may earn a commission at no cost to you.

More audio guides

Open the full calculator → tune DPI, friction & bottlenecks