AimBench

Best DAC/amp for the Moondrop Aria 2 (IEM)

The Moondrop Aria 2 (IEM) is a 33Ω IEM pair. To hit clean 110 dB transient peaks — the headroom that keeps footsteps and gunfire punchy, not just loud — it needs about 1.9 mW into that load. The pick that does it most affordably is the Apple USB-C 3.5mm dongle.

What the Aria 2 (IEM) needs

SpecValueWhy it matters
Impedance33 ΩEasy-ish load, but damping still matters
Sensitivity122 dB/VHow loud per unit power
Power for 110 dB peaks~1.9 mWTransient headroom for positional cues
Amp output impedance≤ 4 Ω idealThe 8:1 damping rule — keeps the tuning flat

Sound character — footsteps, general use & music

AxisGradeWhat it means
Footsteps (positional)3/5The ONLY competitive axis — and it saturates: any clean open-back clears the bar, so more above baseline buys little advantage.
General use4/5All-round daily versatility — comfort/preference, not a competitive edge.
Music4/5Tonal enjoyment — preference, never advantage.

IEM; narrow stage, good imaging; balanced tonality with bass option (Graded 1–5 relative to our catalog; sourced from measurement/review consensus.)

DAC/amps ranked for the Aria 2 (IEM)

The 8:1 damping rule
For tight, neutral bass the headphone's impedance should be at least the amp's output impedance (Zout). Below that, a high-Zout source loses control of the driver — bass bloats and the frequency response shifts with the load. AimBench checks this ratio as a pass/fail sufficiency gate, not a graded score.
DAC / AmpPower @ 33ΩHeadroomDampingVerdict
Apple USB-C 3.5mm dongle29 mW+12 dB37:1Drives it comfortably
Schiit Magni Unity2440 mW+31 dB330:1Drives it comfortably
JDS Labs Atom Amp 22522 mW+31 dB47:1Drives it comfortably
FiiO K111367 mW+29 dB11:1Drives it comfortably
FiiO K5 Pro ESS1452 mW+29 dB28:1Drives it comfortably
Topping L30 II2449 mW+31 dB330:1Drives it comfortably
Creative Sound Blaster G6129 mW+18 dB33:1Drives it comfortably
Topping DX3 Pro+1741 mW+30 dB330:1Drives it comfortably
FiiO K71184 mW+28 dB33:1Drives it comfortably

"Headroom" is power available vs the ~1.9 mW needed for 110 dB peaks (more = cleaner transients). "Damping" is the headphone impedance ÷ amp output impedance — at least 8:1 keeps the frequency response flat. Specs are sourced; the target SPL and 8:1 rule are the declared model.

The pick: Apple USB-C 3.5mm dongle

For the Moondrop Aria 2 (IEM), the Apple USB-C 3.5mm dongle delivers ~29 mW into 33Ω (+12 dB of headroom) at a 37:1 damping ratio — clean, loud, and tonally neutral. It's the most cost-effective amp here that drives these without compromise.

Specs are sourced (manufacturer sheets + RTINGS / Audio Science Review, each with a verified date in our catalog). Buy links are affiliate links to your regional store — AimBench may earn a commission at no cost to you.

More audio guides

Open the full calculator → tune DPI, friction & bottlenecks